Procedure:
Remove left headlight assembly.
Remove Throttle Actuator ADS2 (3541163163) using 10mm socket and take apart its bottom (held together by clips on the body) to access the area for the Bowden cable end to installed. The end of my old cable broke off inside the Throttle Actuator ADS2 (3541163163).
(Part 17 / 16 here)

Thread lower part of the Bowden cable (35411160944) near the headlight area before installing the Throttle Actuator ADS2.

Install the other end piece of the Bowden cable into the Throttle Valve Switch area.

Many thanks Norman!

Jump to top